Posted on

Nike Lebron 15 Low ‘White Metallic

When it comes to basketball, The LEBRON XV has been released for a while . It combines the good performance with  fashion. Various colors have been introduced to make fans get hooked. LEBRON XV LOW EP is available now, using NIKE BATTLEKNIT material uppers and socks-style neckline design there is no way around Nike

Posted on

Adidas Harden Vol.2 Performance Review

With a different configuration and Rashad Williams’s design concept, Harden Vol.2 officially met everyone in February this year. What is the actual  performance in the court ?

Compared to the design of the Harden Vol. 1, Harden Vol. 1 will be better then the Vol. 2, but the design of the shoes is actually improved in terms of performance. Harden Vol.2 uses an extra module to cover the configuration of the full length boots, also it  used  a new Rogefiber technology at the forefoot  and the TPU with the engineering mesh to improve the protection of the feet; The use of a material similar with adidas Dame 4 .

For the ventilation ,it is nice .it used the mesh material  which will also have a certain effect on the air permeability of the shoes.  However, considering the thicker inner boots , the shoes are still a little stuffy.

 

Processed with VSCO with f1 preset

For the cushioning , adidas Harden Vol.2 still used the Adidas  tech  and

it has changed the generation of the lateral colloid-restricted layer into only the forefoot at the same time , and the thickness of Boost has also increased  which making the area of the  bottom to increased the grip.

There is not much difference between the VOL 1 of  textured feeling. It only changes in density and arrangement, and it does not know what changes will be made in the grip and the wear resistance of the shoes.

 

 

Although the thickening of the full length Boost became more  heavier (a Eur 44.5  of Harden Vol.2 with a weight of 514g, and a pair of high-top combat shoes may be about 500g), but it is still adidas “The first popular products.”However, because there is no external module restriction, Boost has a slightly higher density than other full-length Boost sneakers (Crazy Explosive, etc.), so the foot feel is more substantial, but the feeling of “soft

Posted on

Air Jordan 3 ‘Black Cement’ Performance Review

Air Jordan 3 is Michael Jordan’s third signature basketball shoe. It released in 1988 in four colorways of white, black, red, and blue. The Air Jordan 3 Black Cement  has  been popular in the  . It is among the 50 classic shoes last year . Although NIKE released these shoes  limited at the end of last year, . The quantity of AJ3 black cement actually gave the shoe fans a huge surprise. The original price can be bought and already satisfying.Also the price will be slightly lower  sometimes. As an old shoe fan, I naturally cannot afford to miss it.

For the box , The shoe box is an iconic jordan LOGO, although nothing special, but it is still a continuation of the classic, quite satisfactory.

The side is more able to highlight the characteristics of black cement which  same pattern as the shoes side pattern

For the material: The lychee upper on the toe cap feels good, and the JUMP MAN LOGO on the tongue is very eye-catching. The front of the tongue is covered with air holes, which can be regarded as an improvement on the breathability of the thick tongue.material itself was actually pretty good and I had no real issues with it.

 

 

For the supporting .,

For the ventilation:there are perforations, they don’t puncture through the material completely so they are more for looks rather than serve a purpose.

For the cushioning : The polyurethane midsoles  used again  which are far too dense for me and even with an insole swap that I feel it is nice . There is some compression when I fist wear.  Overall the cushioning is nice  , I have not nay complaint.

For the traction: The traction  seems followed the Air Jordan II, the performed well no matter what you were doing.  And the grip is nice, we can feel the great court feeling .But for the player who more weight   , maybe it is not good for them . Maybe they can’t feel more supporting for this one .

Overall , the air jordan3  is perfect shoes as usually .The completing the clean look is a White midsole and outsole. and the supporting is nice .

Posted on

Nike Air Max Dominate Performance Review

In the 1980s and 1990s, the Air Max air with cushion was used as the mainstream of the sneaker world. The huge Air Max air cushion also became a feature of many interior shoe models at that time, and it also accompany a lot of players for long time. However, since the created of the zoom air cushion, the huge and heavy Air Max air cushion has become a accessories on the shoes, which is often the existence of “tangible”

But now, the Air Max has been played in the court.This time, near the Air Max Day, what we bring for you is Davis and Cousins’s shoes, Nike Air Max Dominate.

The configuration of shoes is simple. On the upper, the Air Max Dominate uses a large mesh covering the entire shoes and adds extra colloidal/cortical modules to the inner toe part and the heel-stabilizing part, which increases the sense of design and also adds supporting. At the same time, the sneakers adopt the design of full-length boots, but they are not integrated, that is maybe was not good for some wilder footer

For the midsole，Sneakers use a Phylon with a thickness, denser profile and an Air Max air cushion. The midsloe uses a more traditional one-way ripple + concentric design at the iliac crest, reminiscent of many classic shoes with the same lines.

In addition to the above description, the nylon shoe lifting ring of the shoes and the heel pattern of the mid-bottom Phylon give a lot of points tofor the design .So what exactly does the pair of shoes look like inside?

 

Nike Air Max Dominate’s biggest advantage is – full length used . We mentioned earlier that the PG2’s lacing system is unscientific because the lacing is too low and there is not much difference between the full length and the fore-sole. The Air Max Dominate is not the same. The high-top shoe type design and the upper shoelace hole make it easy to adjust the tightness of the sneakers. At the same time, after fastening the shoelace, it has the same wrapping as the one-piece shoe body. To be honest, it is very satisfying.

Of course, some sweaty friends will surely ask, “Would the thickness will be  stuffy?” Because of the openings cut on both sides of the Air Max Dominate boots, as well as midsole of materials thin  the ventilation of the shoes is also very good. You can even see the approximate color of the mid-length socks around the , which proves that the shoes have good air permeability (of course, if you wear the elite  to play in the summer, then certainly no air permeability).

 

The heel stability of the shoes naturally goes well . Under  the inner boots and the heel with an extra module (external colloid + cortex + inner embraced TPU),it is nice . The firm locking of the heel and the stability of the ankle become the maximum advantage of the shoes. At the same time, the harder midsole material combined with the large density of the lower back of the palm ensures the midsole stability of the shoes, and the resistance of the shoes is also excellent. Although the foresole of the sneakers is slightly disadvantaged which the combination of the heel and the stable midsole support will promote the protection of the sneakers ,so the price is higher .
If you don’t care about cushioning but are very focused on parcels and protection, Nike Air Max Dominate may be one of the best choices for this price.

In fact,  Some signature shoes have a stronger sense of design and tend to make  more complicated bottom type .Although more complex lines can enhance the grip of shoes, but to be honest, compared to the traditional “one-way corrugated” line, it is somewhat “flashy”, and wear-resistance has become a risk factor, and some have lost their weight. feel

 

For the traction, it is nice .there are more pictures as below ：

 

Although Air Max is indeed a “cushioning technology,

Posted on

Nike Kobe 1 Protro Deconstructed Report

NIKE ZOOM KOBE 1 was released in December 2005. It was the first  signature shoe  for Kobe, created by designer Ken Link. The cortex structure of the upper is full of texture, and the Zoom and carbon plates in the midsole ensure the cushioning performance and stability of the shoes. Kobe’s personal LOGO was inspired by the scabbard of the samurai sword. NIKE ZOOM KOBE 1 will be released  in 2018. Let’s take a look at the details.

Nike Zoom Kobe 1 ProtroRelease Date: February 17th, 2018$175Color: Black/Black-Varsity MaizeStyle Code: AQ2728-003

 

Black shoe box with front Kobe personal LOGO and handwritten signature

Though it is simply black and there is a details of site

 

It appears that Nike has big plans for Zoom Kobe 1 as we’ve already learned of a collaboration with LA-based UNDEFEATED, while the timing of the releases appear to coincide with the NBA All-Star game taking place in Los Angeles, the city where Bryant made his name.

For the material :Protro is about evolution and improving on things that were,